Minimum ground pressure and perfect ground tracking – guaranteed by our NOVACAT rear mowers with centre pivot mounting.

The NOVACAT rear mowers are available with working widths of 2.62 m / 3.04 m / 3.46 m / 3.88 m / 4.30 m.

These mowers can be equipped with swathing discs or a conditioner to meet your individual requirements. The NOVACAT 402 ED with a working width of 3.88 metres is the largest rear-mounted mower with conditioner on the market.

Depending on the working width, the NOVACAT rear mowers are available with a vertical or horizontal transport position.

Please browse through all the different models and sizes to see all the different features of the Pottinger range of mowers and to see what model best suits your needs

TRI DRIVE concept

The driveline in the PÖTTINGER cutter bar is famed for its toughness and durability.

3 teeth are always in contact

The bevel gear driveline runs in a straight path with virtually the same sized gears. On the gears there are always three teeth in contact with each other – this ensures optimum power transmission. Moreover, there is less stress on the individual gears in the event of stone impact.

The specially ground surface of the gears submerged in gear oil ensures smooth running. This reduces the noise level considerably.

Gear set 39/50

Gear height 17.5 mm

Practical modular design

Bevel gears and bearings can be removed as a single unit The idler gears are also easily removed through the openings - it couldn't be easier!

The bearing flange and fittings are reliably protected by rubber o-ring seals. This prevents dirt or dust from entering the gearbox.

It also avoids oil leakage.

Heavy-duty bearings

The stub shafts of the individual mower drums have heavy-duty bearings. Durable, twin race taper bearings with a bearing spacing of 60 mm are extremely stress-resistant. Shock loads are absorbed effortlessly.

Bolted stub shafts

The high-strength stub shafts are bolted to the gears. Each of the parts can easily be replaced if required.

• Shaft stub
• Tapered bearing
• Bearing flange
• Spur pinion

Smooth-running driveline

A standout feature of our mowers is their supremely smooth running. The NOVACAT series features a friction-locked drive train directly to the first mower disc. Cardan shafts provide a stress-free link between the angular gearbox and the cutter bar.

On all mowers, a freewheel is integrated into the driveline.