For tractors up to 170 hp

The size of tractor used on medium-sized arable farms continues to increase, so demands on the plough also continue to grow. The SERVO 35 range up to 140 hp matches this segment. For tractors up to 170 hp, the SERVO 35 S range featuring the more robust turnover mechanism is an ideal match

Reversing unit and turnover shaft

The turnover shaft on the SERVO 35 is 100 mm in diameter; on the SERVO 35 S it is 110 mm. The reversing unit made from tempered cast steel is not welded to the turnover shaft. The hydraulic hoses pass through the hollow shaft preventing trapping of the hoses during reversing. The heavy-duty tapered roller bearings are reliably protected from dirt and locked with an adjustable castellated nut. The beam angle is adjusted using two turnbuckles.

Body holder

The tempered leg mounting brackets have a large clamping surface to resist high stress. The bracket surrounds the plough beam with a large area of contact for optimum transfer of forces to the beam.

Solid leg mounting on two sides.

• Double-sided shear protection via shear bolts.
• Five furrow widths easily selected via hole matrix by moving a bolt

For the toughest jobs

The inside of the full-length micro-alloyed fine-grain steel plough beam tube is strengthened by two bolted reinforcements. This technology is unique on the market.

• Maximum plough beam rigidity at the point of maximum bending stress.
• The inner web increases resistance to flexing by up to 25 %.
• The firm seating of the bolted reinforcement forms a high-strength unit.
• No through bolts that could work loose. Secured using Nord-Lock washers