SERVO T 6000 Semi-mounted reversible ploughs

Quick set-up

The settings that need to be made on the SERVO T 6000 can be made easily and intuitively in just a few steps. The working depth is set using swing clips on the support wheel. The front furrow width can be adjusted using the turnbuckle on the stabiliser. The triggering pressure of the NOVA stone protection system can be conveniently changed using the spool valve on the tractor.

• Easily accessible setting points
• Each swing clip changes the working depth by 2.5 centimetres
• Simply rotate the mechanical turnbuckle

Seamless merging between passes

The furrow width of the first plough body can be easily adjusted using the mechanical turnbuckle or optionally using a hydraulic cylinder. This convenient solution means there is no need to leave the tractor cab. In combination with the PLUS system, the furrow width is automatically adjusted when the working width is changed.

• Hydraulic front furrow width setting is standard on PLUS and PLUS NOVA ploughs 

Optimized plough beam design

The plough beam has been engineered to absorb the loads acting on it during operation even better. The configuration aligns the tractive forces along the same plane and minimizes deflections. This makes efficient use of the tractor's pulling power. In addition, the newly designed construction protects all bearing points and mounted components.

• Tractive forces are transmitted in a straight line by the stabilizer towards the rear axle of the tractor
• Enormous strength and reliability during operation
• Protects components and mounting elements

Up to 500 hp

We are prepared for the future. The increasing requirement for higher yields is leading to larger and more powerful tractors being used in the field. With the strong plough beam, an additional strut for support and double-sided linkage lugs for the lower linkage, it has been designed to handle the highest tractive forces. The fittings are positioned so that they do not weaken the plough beam tube. The high strength body mountings reliably transfer forces to the plough body.

Ready for the toughest jobs

The proven NOVA hydraulic stone protection system has been further developed to meet the toughest challenges. An optimized design ensures maximum triggering pressure and the best re-engagement with low weight. The integrated cylinder is protected against dust and dirt. The centrally located hydraulic accumulators are easily accessible and ensure even pressure distribution in the system.

• 2,200 kg triggering pressure per element for the hardest and heaviest soils
• Trip clearance of 48 cm upwards and 20° to the side
•  Additional shear bolt for extreme loads