Our manoeuvrable single rotor machines are the ideal choice for smaller fields. For big output with small tractors, the TOP 422 A and 462 A rakes are also available as trailed versions.

Highest strength

Our rotor units are built so that the stress on the bearings is as low as possible. Wear is minimised as a result. The large diameter cam track with its smooth ramps makes sure that the tines exit the swath ergonomically. Maintenance-free steel cam rollers, high strength cam shafts and wide spacing of the tine arm bearings reduce the force acting on the bearings.

Service friendly

The whole tine arm can be exchanged quickly and easily in the event of any damage. Just undo the fitting to slide the tine arm plus cam roller out of the rotor casing.

Convenient

You do not need to maintain the tine arm bearings.

Also the rotor gears run in a sealed semi-liquid grease gearbox.

The cam track does not need to be greased. So you won't have any problems with oil leaks. TOPTECH PLUS eliminates leak problems and requires no oil checks or oil changes.

Careful forage handling

PÖTTINGER tines do not need to be set too low, conserving the sward and forage as a result. Another advantage is that there is less stress on the cam track and arm control rollers, which contributes to the durability of the machine.

The shape and length of the individual tines have a major influence on protecting the forage and keeping it clean during raking. PÖTTINGER tines have decades of proven performance behind them. They point towards the ground directly under the tine arm and are angled slightly forward, without any need for a steep offset angle. They lift the forage away from the sward without dirt ingress. A high volume of forage presses them back slightly, but without lifting them - so they pick up all of the forage.

In connection with the MULTITAST jockey wheel system you have the perfect starting point for clean and tidy swaths.

Thanks to the length of the tines and the large cam track, the tines are drawn smoothly out of the swath. This ensures that the swath is placed tidily and evenly. This is a benefit to the machines on the next pass. At the same time disintegration losses are minimised.

The tine security system prevents tine loss in the swath. The safety tab is secured reliably over the two outermost tine bolts.