The smooth-running PÖTTINGER rakes with perfect ground tracking and extreme manoeuvrability meet the demands of the industry. Raking with the lowest levels of disintegration and minimum contamination delivers an energy-rich crop and a cost-effective feed basis.

High performance with small tractors

For large working widths with small tractors, PÖTTINGER offer you two single-rotor rakes as trailed versions.

Thanks to the trailed design, no load is exerted on the tractor hitch. Easy attachment and detachment is guaranteed.

Thanks to the parallelogram drawbar, both trailed versions can be hitched to the tractor's linkage bar or ring hitch.

The machine is lifted hydraulically into the transport position conveniently controlled from the tractor seat. Hydraulic cylinders on the chassis and drawbar provide 50 cm of ground clearance.

• The two models offer you a working width of 4.20 m and 4.60 m.
• The tandem axles are fitted with 18.5 x 8.5-8 flotation tyres as standard. This means that your machine runs smoothly both during operation and on the road.

Careful forage handling

PÖTTINGER tines do not need to be set too low, conserving the sward and forage as a result. Another advantage is that there is less stress on the cam track and arm control rollers, which contributes to the durability of the machine.

The shape and length of the individual tines have a major influence on protecting the forage and keeping it clean during raking. PÖTTINGER tines have decades of proven performance behind them. They point towards the ground directly under the tine arm and are angled slightly forward, without any need for a steep offset angle. They lift the forage away from the sward without dirt ingress. A high volume of forage presses them back slightly, but without lifting them - so they pick up all of the forage.

In connection with the MULTITAST jockey wheel system you have the perfect starting point for clean and tidy swaths.

Thanks to the length of the tines and the large cam track, the tines are drawn smoothly out of the swath. This ensures that the swath is placed tidily and evenly. This is a benefit to the machines on the next pass. At the same time disintegration losses are minimised.

The tine security system prevents tine loss in the swath. The safety tab is secured reliably over the two outermost tine bolts.